Click for the BBB Business Review of this Roofing Contractors in Westminster CO

 

 

 

                                  

10343 Federal Blvd #J447, Westminster, CO 80260 | Phone 303-888-4884
Little Wing Roofing provides roofing services in Golden, Denver, Boulder, Fort Collins, and the Colorado Springs area

 
Glossary                        Craftsmanship                                                                                  

                                                  

 

303-888-4884

Locally owned and Operated since 2003

 

 

 

A useful glossary to help increase your vocabulary and improve your knowledge of roofing terms as your roof is being installed.

AGGREGATE
Crushed rock used as a top-layer in some flat-roof applications.

"L" FLASHING
Continuous metal flashing, consisting of several feet of metal. Used at horizontal walls; bent to resemble an L.

ALGAE
Rooftop fungus that can leave dark stains on roofing.

ANGLED FASTENERS
Roofing nails and staples driven into decks at angles not parallel to the deck.

APRON FLASHING
Metal flashing used on chimney fronts.

ASPHALT
A bituminous waterproofing agent used in various types of rooting materials.

ASPHALT PLASTIC CEMENT
Asphalt-based sealant material, meeting ASTM D4586 Type I or II. Used to seal and adhere roofing materials; also called MASTIC; BLACKJACK; ROOF TAR; and BULL.

ASPHALT CONCRETE PRIMER
Asphalt-based primer used to prepare concrete and metal for asphalt sealant.

ASTM
The American Society for Testing and Materials, an organization that sets standards for a wide variety of materials, including roofing.

BACK-SURFACING
Granular material added to the back of shingles to assist in keeping them separated during delivery and storage.

BASE SHEET
Bottom layer of a modified or built-up roofing system.

BITUMEN
Term commonly applied to various mixtures of naturally-occurring solid or liquid hydrocarbons, excluding coal.

BLISTERING
Bubbles or pimples in roofing materials; usually moisture-related. In shingles, blisters are either moisture under the material or moisture trapped inside the material.

BLOW-OFFS
Occurs when shingles are subject to high winds and are forced off a roof deck.

BRIDGING
A method of re-roofing with metric-sized shingles.

BUCKLING
Occurs when a wrinkle or ripple affects shingles or their underlayments.

BUILT-UP ROOF
A type of commercial-, or, flat-, roof finish produced by applying alternate layers of roofing felt and hot asphalt or pitch. The top layer is given a hot flood coat of the bitumen; granules of rock, gravel, slag, or ceramic particles may be embedded while the flood coat is still hot. The roofing system may incorporate rigid insulation.

BUNDLE
A package of shingles. There are three to five bundles per square.

BUTT EDGE
The lower edge of shingle tabs.

CAP FLASHING
The portion of flashing attached to a vertical surface to prevent water from migrating behind the base flashing.

CAP SHEET
A top layer in a built-up or modified roofing system.

CAULK
To fill a joint with mastic or asphalt plastic cement to prevent leaks.

CHALK LINE
A line made on the roof by snapping a taut string or cord dusted with chalk. Used for alignment purposes.

CLASS "A" FIRE RESISTANCE
The highest fire-resistance rating for roofing per ASTM E 108. Indicates that roofing is able to withstand severe exposure to fire originating from sources outside the building.

CLASS "B" FIRE RESISTANCE
Fire-resistance rating that indicates that roofing material is able to withstand moderate exposure to originating from sources outside the building.

CLASS "C" FIRE RESISTANCE
Fire-resistance rating that indicates that roofing material is able to withstand light exposure to originating from sources outside the building.

CLOSED CUT VALLEY
A method of valley treatment in which shingles from one side of the valley extend across the valley, while shingles from the other side are trimmed two inches from the valley centerline. The valley flashing is not exposed.

COLD PROCESS ADHESIVE
Mastic prepared with SBS modifiers to adhere laps, flashings, and joints of built-up or low-slope roofing without hot-mopping or torching equipment, or, the primary adhesive used to adhere the roofing membrane in a cold-applied roofing system.

COLLAR
Pre-formed flange placed over a vent pipe to seal the roofing above the vent pipe opening.

COMPOSITE ROOFING
Roofing shingles made with a mixture of plastic and minerals. The shingles are driven into the underlying course of roofing and covered by a cemented overlapping course. Nails are not exposed to the weather.

CONCEALED NAIL METHOD
Application of roll roofing in which all nails are driven into the underlying course or roofing and covered by a cemented overlapping course. Nails are not exposed to the weather.

COPING JOINT
The intersection of a roof slope and an exterior vertical wall.

CORROSION
When rust, rot, or age negatively affect roofing metals.

COUNTER-FLASHING
The metal or siding material that is installed over roof-top base flashing systems.

COURSE
A row of shingles or roll roofing running the length of the roof.

COVERAGE
Amount of weather protection provided by the roofing material. Depends on number of layers of material between the exposed surface of the roofing and the deck, e.g. single coverage, double coverage, etc.

CRICKETS
A peaked water diverter installed behind chimneys and other large roof projections. Effectively diverts water around projections.

CUPPING
When shingles are improperly installed over an existing roof, or are overexposed, they form a curl or cup.

CURB
The short elevation of an exterior wall above the deck of a commercial flat roof.

DECK
The substrate over which roofing is applied. Usually plywood, wood boards, or planks.

DORMER
A raised roof extending of a larger roof plane.

DRIP-EDGE
An installed lip that keeps shingles up off of the deck at edges, and extends shingles out of over eaves and gutters, and prevents water from backing up under shingles.

EAVES
The roof edge from the fascia to the structure’s outside wall. In general terms, the first three feet across a roof is termed the eave.

END-LAPS
When installing rolled products in roofing, the area where a roll ends on a roof, and is overlapped by the next section of rolled material (underlayments, rolled roofing).

EXPOSURE
The area on any roofing material that is left exposed to the elements.

FASTENERS
Nails or staples used in securing roofing to the deck. Felt-organic or paper-based rolled material saturated with asphalt to serve as roofing underlayment.

FHA
The Federal Housing Authority. Sets construction standards throughout the United States.

FIBERGLASS MAT
Fibers condensed into strong, resilient mats for use in roofing materials.

FLANGE
Metal pan extending up or down a roof slope around flashing pieces. Usually at chimneys and plumbing vents.

FLASHING
Material used to waterproof a roof around any projections throughout the roof deck.

FLASHING CEMENT
Sealant designed for use around flashing areas, which is typically thicker than plastic cement.

GABLE ROOF
Traditional roof style, two-peaked roof planes meeting at a ridge line of equal size.

GAMBREL ROOF
A type of roof with a gable on either end, but with two sloping roof planes of different angles on either side, the lower of which is steeper than that of the upper. A common barn roof or mansard roof.

GRANULES
Crushed rock that is coated with a ceramic coating and fired. Used as a top surface on shingles.

HAND-SEALING
The method to assure sealing of shingles on very steep slopes, in high-wind areas, and when installing in cold weather.

HEAD LAP
Shortest distance from the butt edge of an overlapping shingle to the upper edge of a shingle in the second course below it. The triple coverage portion of the top lap of strip shingles.

HIGH NAILING
When shingles are nailed or fastened above the manufacturer’s specified nail location.

HIP LEGS
The down-slope ridges on hip roofs.

HIP ROOF
A roof with four roof planes coming together at a peak and four separate hip legs.

ICE DAM
When a snow load melts on a roof and re-freezes at the eaves. Ice dams force water to back up a roof and cause leakage.

LAPS
The area where roll roofing or rolled underlayments overlap one another during application.

LOW SLOPES
Roof pitches less than 4:12 are considered low-sloped roofs. Special installation practices must be used on roofs sloped 2:12 – 4:12.

MANSARD
A roof design with a nearly vertical roof plane that ties into a roof plane of less slope at its peak.

MATS
The general term for the base material of shingles and certain rolled products.

MODIFIED BITUMEN
Rolled roofing membrane with polymer modified asphalt and either polyester or fiberglass reinforcement.

MORTAR
Mixture of sand, mortar, limestone, and water, used in bonding a chimney’s bricks together.

NAIL-GUIDE-LINE
Painted line on laminated shingles that aid in the proper placement of fasteners.

NAIL-POP
When a nail is not fully driven, it sits up off of the roof deck.

NESTING
Installing a second layer of shingles aligning courses with the original roof to avoid shingle cupping.

NRCA
The National Roofing Contractors Association. Respected national organization of roofing contractors.

OPEN VALLEY
Valley installation using metal down the valley center.

ORGANIC MATERIAL
Material made from recycled wood pulp and paper.

ORGANIC SHINGLES
Shingles made from paper products.

OSB
Orientated strand board. A decking made from wood chips and lamination glues.

OVER-DRIVEN
The term used for fasteners driven through roofing material with too much force, breaking the material.

OVER-EXPOSED
Installing shingle courses higher than their intended exposure.

PITCH
Ratio of the rise of the roof to the span of the roof.

PLASTIC CEMENT
Asphalt-based sealant material, meeting ASTM D4586 Type I or II. Used to seal and adhere roofing materials. Also called MASTIC; BLACKJACK; ROOF TAR; and BULL.

PLUMBING VENTS
Term used to describe plumbing pipes that project through the roof.

POWER VENT
Electrically-powered fans used to move air from attics and structures.

PREVAILING WIND
The most common direction of wind for a particular region.

QUARTER SIZED
Term for the size of hand-sealant dabs; size of U.S. quarter.

RACKING
Method of installing shingles in a straight-up-the-roof manner.

RAKE EDGE
The vertical edge of gable-style roof planes.

ROOF LOUVERS
Rooftop rectangular-shaped roof vents. Also called BOX VENTS; MUSHROOM VENTS; AIRHAWKS; AND SOLDIER VENTS.

ROOF PLANE
A roofing area defined by having four separate edges. One side of a gable, hip, or mansard roof.

SELF SEALANT
Sealant installed on shingles. After installation, heat and sun will activate sealant.

SELVAGE
The non-exposed area on rolled roofing. Areas without granules. Designed for nail replacement and sealant.

SHED ROOF
Roof design of a single roof plane. Area does not tie into any other roofs.

SIDE LAPS
The area on rolled material where one overlaps the rolled material beneath it. Also called selvage edge on rolled roofing.

SIDE WALLS
Where a vertical roof plane meets a vertical wall, e.g. the sides of dormers.

SOFFIT VENTILATION
Intake ventilation installed under the eaves, or at the roof edge.

STARTER STRIP
The first course of roofing installed. Usually trimmed from main roof material.

STEEP-SLOPE ROOFING
Generally all slopes higher than 4:12 are considered steep slopes.

STEP-FLASHING
Metal flashing pieces installed at side walls and chimneys for weatherproofing.

TAB
The bottom portion of traditional shingle separated by the shingle cut-outs.

TEAR-OFF
Removal of existing roofing materials down to the roof deck.

TELEGRAPHING
When shingles reflect the uneven surface beneath them. Shingles installed over buckled shingles may show some buckles.

TRANSITIONS
When a roof plane ties into another roof plane that has a different pitch or slope.

UNDER-DRIVEN
Term used to describe a fastener not fully driven flush to the shingle’s surface.

UNDERLAYMENTS
Asphalt-based rolled materials designed to be installed under main roofing material, to serve as added protection.

VALLEYS
Area where two adjoining sloped-roof planes intersect on a roof creating a V-shaped depression.

VAPOR
Term used to describe moisture-laden air.

VENTILATION
Term used in roofing for the passage of air from an enclosed space.

WARM WALL
A finished wall inside of a structure. Used in roofing to determine how to install waterproof underlayments at eaves.

WARRANTY
The written promise to the owner of roofing materials for material-related problems.

WATERPROOF UNDERLAYMENTS
Modified bitumen-based roofing underlayments. Designed to seal to wood decks and waterproof critical leak areas.

WOVEN VALLEYS
The method of installing valleys by laying one shingle over the other, up the valley center.

 

 

 

 

Glossary

 

 

 

 

 

 

 

 

 

 

Home                     Contact                    Roofing Guidelines                  FAQ                    About Little Wing